Increased productivity
MOVITRANS® offers maximum system reliability and is wear-free and maintenance-free
Easy to configure
With its individual system components, MOVITRANS® can be easily adapted to suit changing system tasks and modifications
Cut costs
MOVITRANS® increases system availability and minimizes maintenance requirements in the long term
Do your systems span lengthy distances? Meaning that you need to transport your goods at high speed? Do you want to avoid contamination caused by energy transfer in contamination-sensitive areas?
Then MOVITRANS® is the perfect power supply system for you. It operates on the principle of inductive energy transfer. Electrical energy is transferred from a fixed conductor to one or more mobile consumers without contact. Time-consuming, cumbersome drag-chain systems have become a thing of the past.
The electromagnetic connection is made via an air gap and is maintenance-free and wear-free. This contactless energy supply enables high speeds of more than 10 m/s. And as line cables are routed under the floor, there are no longer any obstacles disrupting transverse traffic.
Another major advantage: this type of power supply is emission-free and resistant to contamination. The system does not produce any noise emissions either. All of this contributes significantly to higher productivity levels, as maintenance and installation are more efficient.
Achieve cost efficiencies thanks to our lean, compelling system design, from simple track segmentation to flexible track design with curves and points. Fast, easy assembly also cuts costs, as only two cables have to be routed along the travel distance.
The use of the MOVITOOLS® engineering software means that starting up and using the technology is extremely simple.
Ved at aktivere postnummersøgningen overføres data til USA af Google. For mere information, se vores fortrolighedspolitik.
MOVITRANS® består af stationære og mobile systemkomponenter. De kan nemt og hurtigt integreres i eksisterende automatiseringssystemer.
Når linjelederen er lagt på eller i jorden, anvendes det flade pickup. Luftspalte mellem linjelederen og pickupen kan være op til 20 mm. Derfor er en høj overførselskapacitet mulig, selv i de tilfælde, hvor pickupen ikke føres med en konstant afstand over linjelederen.
U-formede pickups er nødvendige, når der kun er et begrænset monteringsrum til rådighed, eller når operatøren ønsker at erstatte et eksisterende strømskinnesystem med kontaktløs energioverførsel. I sådanne tilfælde foregår lægningen af linjelederen altid i et profil-strømsystem. Da det U-formede pickup »omfavner« lederen, kan det i forhold til sin kompakte størrelse opnå en meget høj overførselsydelse. Luftspalte mellem linjelederen og pickupen udgør ca. 10 mm i alle retninger.
Styringselement TPS
TAS-transformermodul
Tilslutningsfordeler TVS
Kompensationsboks TCS
Mellemfrekvenskabel TLS til nedgravning
Installationskomponenter til ledningsføring TIS
Fladt pickup THM10E
U-formet pickup THM10C
Mobil omformer TPM12B
Tilslutningskabel (hybridkabel) til TPM12B-udgang