• Detailed information about your customized product
  • CAD data and documentation for your configuration
  • Option to directly request a quotation or place an order
 Konfigurer produkt nu
The benefits for you

Consistent
Addition of safe I/O modules and further non-safe function modules to the portfolio, which are operated via the same coupler.

Service-friendly
Easy to install and service thanks to simple and fast assembly by means of a safe sliding mechanism.

Space-saving
Space-saving, staircase-shaped wiring level with spring-loaded clamping technology.

Scalable
With additional supply modules - up to 64 modules possible on the backplane bus.

Control technology Control cabinet technology Decentralized drive technology Drive technology

The right tool for the perfect solution

In conjunction with the new MOVI‑C® CONTROLLER portfolio, interaction between the product portfolio of SEW‑EURODRIVE and external field units is optimized. Take advantage of the wide range of function modules and their combination options. Simply integrate them into the EtherCAT® bus of the controller via the bus coupler and use the full functionality in daily practice: For example, read in binary as well as analog signals or SSI encoder signals, or obtain data from counter or measuring modules, e.g. energy consumption.

Suitable I/O modules are also available for Safety over EtherCAT® for the special requirements in functionally safe areas.

Digital 16-way I/O modules round off the MOVI-PLC® portfolio

Digital modules with 16 input and output channels enable a compact and space-saving design of your system. The modules have an easy-to-install wiring level with spring-loaded terminal technology.
Kontaktformular SEW-EURODRIVE worldwide Locations in Denmark

Ved at aktivere postnummersøgningen overføres data til USA af Google. For mere information, se vores fortrolighedspolitik.

Properties and technical data

A module unit is made up of a terminal module and an electronics module. These are connected using a secure sliding and locking mechanism. The terminal module combines clamps, a fixture for the electronics module and the backplane bus connector. This means only the electronics module is replaced during servicing, by simply pulling it out of the terminal module. The wiring and mounting on the 35 mm DIN profile rail remain as they are. The electronics modules can be supplied with voltage and/or divided into separate potential groups by using additional supply modules.

The stepped arrangement of terminals on the terminal module using proven spring-clamp technology with highly reliable contacting enables fast, clear and safe wiring. The integrated status LEDs and the labeling strip on the front of the electronics modules ensure unique, channel-specific assignment and clear display of the channel status. The backplane bus concept with a speed of 48 Mbit/s also makes for very short response times.

In addition, a high system density can be achieved through digital input and output modules with up to 16 channels.

Areas of application of the I/O modules

Our I/O modules can be used whenever you are looking to integrate actuators, sensors or other field units into your automation network.
Assignment to above image Examples of applications Designation Possible field bus units / technologies
1 Presence monitoring / reference initiators
(binary signals) 		ODI..C
ODO..C 		Optoelectronic sensors, ultrasound sensors, inductive/capacitive sensors, laser light sensors, print mark sensors, light columns and fluid sensors
2 Height monitoring / distance measuring
(analog signals) 		OAI..C
OAO..C 		Optoelectronic distance measuring devices, ultrasound sensors and inertial sensors
3 Evaluating encoder signals
(counter modules / SSI module) 		OSM12C
OSM13C
OSM14C 		Rotary encoders and encoders
4 Load cell / strain gauge OSM11C Strain gauge
5 Serial interfaces ORS11C Laser light sensors, optoelectronic distance measuring devices, optical identification sensors and RFID
6 Temperature measurement OAI45C Pt100, Pt1000, Ni100 and Ni1000 temperature sensors
7 Energy measurement OEM12C Three-phase grids
8 Hazardous point protection with hand and presence detection / functional safety OFI41C
OFO41C 		Safety light grid, safety scanner, safety switch, safety locking device and emergency stop

Communication

EtherCAT® and CANopen interface modules are available for data exchange when using this solution. The I/O modules are equipped with a power supply module and support up to 64 electronics modules on the backplane bus.

Certifications/conformity

  • CE (European Economic Area)
  • RoHS (China)
  • cULus (USA, Canada)
  • UKCA (United Kingdom)
  • WEEE (European Economic Area)

Buskobler
Modul Beskrivelse Egenskaber datablad
OCE12C Buskobler
  • EtherCAT-buskobler® (SBusPLUS)
 Til databladet
OCC11C Buskobler
  • Bus-kopler CAN (SBus)
 Til databladet

Digitale indgangs- og udgangsmoduler
Modul Beskrivelse Egenskaber datablad
NYT: ODI161C Digitalt indgangsmodul
  • 16 × DI
  • DC 20,4–28,8 V
  • 2,3 mA
 Til databladet
NYT: ODO161C Digitalt udgangsmodul
  • 16 ×DO
  • DC 20,4–28,8 V
  • 0,5 A
 Til databladet
ODI24C Digitalt indgangsmodul
  • 2 × DI
  • DC 24 V
  • Indgangsfilter Tidsforsinkelse kan indstilles 2 μs - 3 ms
  • ETS-funktion med µSek-tidsstempel
 Til databladet
ODI42C Digitalt indgangsmodul
  • 4 × DI (hurtig)
  • DC 24 V
  • Indgangsfilter med indstillelig tidsforsinkelse 2 µs – 4 ms
 Til databladet
ODI43C Digitalt indgangsmodul
  • 4 × DI
  • DC 24 V
  • 2/3-leder-tilslutning
 Til databladet
ODI81C Digitalt indgangsmodul
  • 8 × DI
  • 24 V DC
 Til databladet
ODO21C Digitalt udgangsmodul
  • 2 × DO
  • DC 30 V
  • AC 230 V
  • 3 A
  • potentialeadskilt pr. kanal
  • relæ
 Til databladet
ODO41C Digitalt udgangsmodul
  • 4 × DO
  • DC 24 V
  • 2 A
 Til databladet
ODO81C Digitalt udgangsmodul
  • 8 × DO
  • DC 24 V
  • 0,5 A
Til databladet
ODO82C Digitalt udgangsmodul
  • 8 × DO
  • DC 24 V
  • 0,5 A
  • NPN
 Til databladet

Analoge indgangs- og udgangsmoduler
Modul Beskrivelse Egenskaber datablad
OAI42C Analogt indgangsmodul
  • 4 × AI
  • 16 bit
  • Strøm 0(4) – 20 mA
 Til databladet
OAI41C Analogt indgangsmodul
  • 4 × AI
  • 16 bit
  • Spænding -10 V – +10 V
 Til databladet
OAI44C Analogt indgangsmodul
  • 2 × AI
  • 16 bit
  • Spænding -80 mV – +80 mV
  • TC-type J, K, N, R, S, T, B, C, E, L
  • Reducerede parameterbytes
 Til databladet
OAI45C Analogt indgangsmodul
  • 4 × AI
  • 16 bit
  • Modstand 0–3000 ohm
  • Modstandsmåling med 2-, 3- og 4-leder
  • Modstandstemperaturfølere Pt100, Pt1000, NI100 og NI1000
 Til databladet
OAO42C Analogt udgangsmodul
  • 4 × AO
  • 12 bit
  • Strøm 0(4) – 20 mA
 Til databladet
OAO41C Analogt udgangsmodul
  • 4 × AO
  • 16 bit
  • Spænding -10 V – +10 V
 Til databladet

Sikkerhedsmoduler

  • Safety over EtherCAT® I/O-moduler med hver 4 sikre I/O-udgange
  • For udvurdering og logisk sammenkobling skal modulerne forbindes til en sikkerhedsstyring via buskobleren
Modul Beskrivelse Egenskaber datablad
OFI41C Sikker digital indgang
  • 4 × SDI
  • DC 24 V
  • 0,5 A
  • Sikkerhed
 Til databladet
OFO41C Sikker digital udgave
  • 4 × SDO
  • DC 24 V
  • 0,5 A
  • Sikkerhed
 Til databladet

Funktionsmoduler
Modul Beskrivelse Egenskaber datablad
NYT: OSS21C Stegmotorklemme
  • Enkoderinterface 5 V/TTL
  • DC 48 V, 5 A
  • 3 digitale indgange, 1 digital udgang
  • Kommunikation via buskobler OCE12C
 Til databladet
OSM11C Analog indgang DMS
  • Direkte tilslutning af en fuldbro-modstandsmåler (DMS) eller vejecelle
  • 4- eller 6-ledningstråd-tilslutning
  • 16 (24) bit opløsning
  • Absolut nøjagtighed, grundfejl ±0,1 % (± 0,01 %)
  • Indbygget strømforsyning 2,5 V, 5 V, 7,5 V, 10 V og 12 V
 Til databladet
OSM12C SSI-modul
  • SSI-encoder, master-slave-drift
  • Encoderfrekvens 125 kHz – 2 MHz
  • µs-tidsstemplingsfunktion
  • Alarmfunktion
  • Diagnosefunktion
 Til databladet
OSM13C Tællermodul
  • 1 × 32-bit tæller (AB), 24 V DC
  • op til 400 kHz
  • 1x DO, 24 V DC til sammenligningsfunktion
  • 0,5 A
 Til databladet
OSM14C Tællermodul
  • 1 × 32-bit tæller (AB), DC 5 V
  • op til 2 MHz (differenssignal)
  • Sammenligningsfunktion
 Til databladet
OEM12C Energimålemodul
  • AI 1 × 3-faset, 230 / 400 V
  • 3-faset og N-leder
  • Strømområde 1 A (kan udvides via strømtransformer)
  • Permanent lagring af energiværdier; diagnosefunktion
  • Opløsning af måleværdi: 24 bit
  • Tilgængelige måleværdier: Spænding og strøm, elektrisk effekt, elektrisk arbejde, harmoniske overbølger, faseforskydning cos phi, frekvens
 Til databladet
ORS11C RS422/485-interface
  • RS422/485-interface
  • Protokolle: ASCII, STX/ETX, 3964(R) og Modbus RTU (master, slave)
 Til databladet

Strømforsynings-, fordelings- og tilbehørsmoduler
Modul Beskrivelse Egenskaber datablad
OPV81C Potentialfordeler
  • 8 × DC 24 V-klemmer
 Til databladet
OPV82C Potentialfordeler
  • 8 × DC 0 V-klemmer
 Til databladet
OPV41C Potentialfordeler
  • 4 × DC 24 V-klemmer
    4 × DC 0 V-klemmer
 Til databladet
OPM11C forsyningsmodul
  • Indgangsspænding DC 24 V
  • 10 A
  • beskyttelse mod polombytning
  • overspændingsbeskyttelse
 Til databladet
OZB11C Busafskærmning
  • 1 stk.
 Til databladet
OZS11C Skærmskinneholder
  • 10 stk.
 Til databladet